Short answer: an MCB box (distribution board, DB) holds the incomer and the MCBs for each circuit. Choose SPN for single-phase supply and TPN for three-phase, then pick the number of ways from your circuit count plus about 20–25% spare.

SPN vs TPN MCB box

Type

Supply

What "way" means

Typical use

SPN (single pole and neutral)

Single-phase 230 V

One single-pole MCB per way

Flats, small shops, offices

TPN (triple pole and neutral)

Three-phase 415 V

Each way has three poles (R, Y, B)

Larger homes, commercial floors, three-phase loads

Vertical TPN / PPI

Three-phase

Phase-wise rows

Commercial and industrial sub-distribution

How many ways do you need?

  1. List every circuit: lighting, socket circuits, each AC, geyser, kitchen, pump, inverter, outdoor.
  2. Give heavy loads (AC, geyser, oven, pump) their own MCB.
  3. Add space for the incomer (isolator, RCCB or RCBO), which uses 2–4 module widths.
  4. Leave about 20–25% spare ways for future circuits.

Typical premises

Common size

Small flat / shop

4–8 way SPN

2–3 bedroom flat

8–12 way SPN

Larger home or office with three-phase supply

4–8 way TPN

Commercial floor

8–12 way TPN or vertical TPN

These are typical choices; the circuit list decides the actual size.

Single door or double door?

  • Single door: economical, for homes and dry indoor areas.
  • Double door: an inner cover shields live parts while the outer door is open; preferred for offices and public buildings.
  • IP-rated (IP42–IP65) boxes for dusty, damp or outdoor locations.

Incomer and protection options

  • Isolator or main MCB as the incomer.
  • RCCB as incomer for whole-board earth leakage protection, or RCBOs per circuit so one fault does not trip everything.
  • Pin or fork MCB busbars to match the MCB make.
  • An SPD where lightning surges are common.

We supply distribution boards with MCBs and RCCB/RCBO incomers in leading makes from Kolkata, and build larger power distribution boards at our works. Send your circuit list for a matched quotation.

Frequently asked questions

What is a TPN MCB box?

A three-phase distribution board with triple pole and neutral ways; each way takes three single-pole MCBs or one three-pole MCB.

How many ways does an MCB box need for a flat?

Commonly 8–12 ways SPN for a 2–3 bedroom flat, but count your circuits and add 20–25% spare.

Can I fit an RCBO in a normal MCB box?

Yes, most DBs accept RCBOs of the same make; check module width and busbar type.

Specify your requirement

Send the rating, make, quantity and delivery location. Attach the drawing or datasheet where available.

Request a quote Or send it on WhatsApp ↗