Short answer: an electrical panel board is an enclosed assembly of switchgear, busbars and controls that receives power and distributes, protects and controls it. In industry the main types are the PCC (power control centre), MCC (motor control centre), APFC panel (power factor correction), PLC panel, AMF/DG synchronising panel and distribution boards. Low-voltage panels are designed and verified to IEC 61439.
Types of electrical panel board
Panel | What it does | Typical contents |
|---|---|---|
PCC (power control centre) | Main LT distribution from transformer or DG | ACB or MCCB incomers, bus coupler, outgoing feeders, metering |
MCC (motor control centre) | Starts, protects and controls motors | DOL, star-delta, soft starter and VFD feeders |
APFC panel | Automatically corrects power factor | Capacitors, contactors or thyristors, reactors, PF controller |
PLC panel | Automates machines and processes | PLC, I/O, HMI, power supplies, relays |
AMF / synchronising panel | Starts DG on mains failure; parallels sets | Changeover breakers, controller, synchronising relay |
Distribution board (DB) | Final circuit distribution | MCBs, RCCBs, isolators |
PCC vs MCC
A PCC handles bulk power distribution to sub-panels and large loads, so its feeders are breakers sized for current and fault level. An MCC is built around motor feeders, each with the starter type, protection and controls the motor needs. Many plants have a PCC feeding several MCCs.
IEC 61439 and forms of separation
- IEC 61439-1 and -2 cover low-voltage power switchgear and controlgear assemblies and their design verification.
- Form 1: no internal separation.
- Form 2: busbars separated from functional units.
- Form 3: functional units also separated from each other.
- Form 4: terminals also separated, allowing work on one feeder while others stay live.
How to specify a panel board
- Single-line diagram and feeder schedule.
- Incoming supply, fault level (kA for 1 s) and busbar rating.
- Breaker and starter types, protection and metering.
- Form of separation, IP rating, enclosure and cable entry.
- Approved component makes and documentation and testing needs.
What to send for a quotation
The SLD, feeder or motor schedule, fault level, approved makes and site conditions. Tirupati Power Enterprises manufactures PCC, MCC, APFC, PLC and LT panels in Kolkata and delivers across India.
Frequently asked questions
What is an electrical panel board?
An enclosed assembly of switchgear, busbars and controls that receives power and distributes, protects and controls it.
What is the difference between PCC and MCC panels?
A PCC distributes bulk power to feeders and sub-panels; an MCC controls and protects motors with dedicated starter feeders.
What is an APFC panel?
An automatic power factor correction panel that switches capacitor steps to keep the power factor near the target and avoid penalties.
Which standard applies to LT panels?
IEC 61439 (Parts 1 and 2) for low-voltage switchgear and controlgear assemblies.
Specify your requirement
Send the rating, make, quantity and delivery location. Attach the drawing or datasheet where available.
Request a quote Or send it on WhatsApp ↗




