Wire Strippers
Industrial Wire Strippers remove a controlled length of insulation from a compatible conductor without damaging the strands.
Product-type reference. The supplied make and configuration are confirmed in your quotation.
Information to include in your RFQ
Selection requirements for this product type |
|---|
Conductor size and solid/stranded construction |
Insulation material and thickness |
Strip length, blade and adjustment |
Single-core, multicore or special cable task |
Replacement and quotation checks
For a replacement, send the existing wire strippers reference and photographs of its markings, connections and mounting. Include the equipment drawing or datasheet where available. Identify which functions must remain unchanged and whether an alternative make is acceptable.
Related products and buying guidance
Hydraulic Crimping & Cutting Tools
Request a line-by-line quotation
Sources and further reading
Phoenix Contact crimping systems
Match the wire stripper to the conductor and insulation
Choose a wire stripper for the actual wire range and insulation. Fine stranded control wire, solid building wire and a cable outer sheath can need different tools. A photo of the cable marking and a short sample specification help identify the correct tool.
What to include in the quotation request
Selection input | Send with your RFQ | Why it matters |
|---|---|---|
Conductor range | Give conductor area in mm² or the specified AWG range. | Check the complete supported range, not just the largest wire size. |
Wire construction | Identify solid, stranded or fine stranded conductors. | Use a tool intended for that construction. |
Insulation and strip length | State the insulation type and required strip length. | The insulation must be removed without cutting conductor strands. |
Workload | Choose manual, self-adjusting or powered preparation as required. | Include replacement blades and stops if the job needs them. |
Related products for the same requirement
Compare the crimping & cable preparation tools range, including Wire Ferrules & Cord End Terminals, Insulated Terminals & Lugs, Hydraulic Crimping & Cutting Tools. List each required item, quantity and delivery location in the same RFQ.
Questions about Wire Strippers
What should I check before selecting wire strippers?
A general insulation stripper may not suit enamel, silicone or shielded cable constructions. Confirm the exact cable and blade arrangement.
What information is needed to quote wire strippers?
Provide conductor size and solid/stranded construction; insulation material and thickness; strip length, blade and adjustment; single-core, multicore or special cable task. Include the quantity, requested make or existing reference and delivery PIN code.
Can one wire stripper strip both single wires and cable sheaths?
Only if the manufacturer specifies both duties. A wire stripping tool and an outer sheath stripping tool can use different blade arrangements. Send the wire or cable construction before selecting a combined tool.
Relevant products and guidance
Need this for your application?
Send the specification, quantity and delivery PIN code. Our Kolkata team quotes supply across India, including eastern India, with availability and freight confirmed for your order.