PID Temperature Controllers
PID Temperature Controllers regulate a heating or cooling process using a measured temperature and an output control function.
Product-type reference. The supplied make and configuration are confirmed in your quotation.
PID temperature controllers: specifications and purchase enquiries
Tirupati Power Enterprises supplies PID temperature controller requirements for industrial panels and process equipment. Send the existing model or specify the sensor input, operating range, control output, supply and panel cut-out. A temperature controller price should identify whether the device has the required input and output options, rather than only a matching display size.
The controller, temperature sensor and power-switching device are separate parts of the loop. Use this page for the controller requirement and identify any sensor, SSR, contactor or other accessory you also need. Include the machine application and destination in Kolkata, West Bengal, Odisha, Assam or elsewhere in India so the quotation can cover the complete purchasing scope.
Information to include in your RFQ
Selection requirements for this product type |
|---|
Thermocouple, RTD or analogue input |
Supply voltage and panel cut-out |
Relay, SSR-drive or analogue output |
Control zones, alarms and communication |
Replacement and quotation checks
For a replacement, send the existing PID temperature controllers reference and photographs of its markings, connections and mounting. Include the equipment drawing or datasheet where available. Identify which functions must remain unchanged and whether an alternative make is acceptable.
Related products and buying guidance
Browse automation requirements
SMPS & Industrial Power Supplies
Request a line-by-line quotation
Sources and further reading
OMRON industrial components and datasheets
PID controller input, output and panel-fit checklist
A compatible controller must read the installed sensor and drive the intended control circuit. Confirm the order-code options and terminal diagram for the proposed model.
Selection point | Specify in your enquiry | Check before ordering |
|---|---|---|
Sensor input | Thermocouple type, RTD type/wiring or process signal | Check supported inputs, range and sensor connection |
Control output | Relay, SSR-drive pulse, analog or other specified output | Match the receiving device; an SSR-drive output is not a power output for the heater |
Supply | Required AC/DC controller supply and range | Do not confuse instrument supply with sensor or load voltage |
Panel fit | Front size, cut-out, depth and mounting brackets | Check rear clearance and terminal access |
Control functions | Heating/cooling, alarms, tuning and set-point requirements | Specify needed functions rather than assuming every PID model has them |
Communication | Protocol, interface and required monitoring | Confirm the option is included in the exact order code |
Price comparison: ask for the complete configuration
PID temperature controller prices depend on input options, control outputs, alarms, communication and size. Compare complete ordering codes. Ask whether the offer includes the sensor, SSR, heat sink or only the instrument. If the old controller operated a relay but the new one has an SSR-drive output, matching the front dimensions alone does not make the replacement suitable. Request the terminal drawing with any proposed alternative.
Send a purchase-ready enquiry
For a replacement, send the front label, full ordering code, terminal diagram and existing sensor information. Include the machine temperature range and the device driven by the output.
For a new heating loop, have the required sensor, control and independent protection arrangement specified. PID tuning is application-dependent; purchasing a controller does not by itself guarantee a particular process accuracy or overshoot.
- Input sensor/signal, wiring and operating temperature range.
- Controller supply and output type; heater-switching interface.
- Panel cut-out/depth, alarms and communication options.
- Controller-only or complete accessory scope; quantity and delivery details.
Checks before you approve the order
Define the complete loop
OMRON’s temperature-control overview separates measurement, controller action and the manipulated output. Keep these roles distinct when preparing the enquiry.
Match output to power switching
An SSR-drive pulse output requires a compatible SSR input. Verify both references, supply and switching arrangement.
Plan independent protection
State any required independent over-temperature protection and its separate component scope in the project specification.
Buying guidance and technical reference
Related buying ranges and detailed guidance
Manufacturer technical reference
OMRON: temperature controller configuration and control principles
Questions about PID Temperature Controllers
What should I check before selecting PID temperature controllers?
An SSR-drive output is a control signal rather than a heater power output. Sensor type, polarity and wiring must match the controller configuration.
What information is needed to quote PID temperature controllers?
Provide thermocouple, RTD or analogue input; supply voltage and panel cut-out; relay, SSR-drive or analogue output; control zones, alarms and communication. Include the quantity, requested make or existing reference and delivery PIN code.
What do I send for a PID temperature controller price?
Send the full order code or sensor input, range, output type, supply, panel size, alarms and communication. Identify whether accessories are included.
Can a controller use both thermocouple and RTD inputs?
Some models support multiple inputs, but capabilities and setup differ. Confirm the exact input types, wiring and range for the proposed reference.
Does SSR output mean the controller powers the heater?
An SSR-drive output normally provides a control signal to a compatible external SSR. Confirm the instrument and SSR specifications; do not treat it as the heater power circuit.
Can I replace a controller using only its front size?
Also check cut-out, depth, supply, input, output, alarms, terminal assignment and functions. A matching front size does not establish compatibility.
Will auto-tuning guarantee the required process result?
Tuning depends on the process, sensor location, heater and operating conditions. Agree the control and commissioning requirements separately from the instrument supply.
Relevant products and guidance
Need this for your application?
Send the specification, quantity and delivery PIN code. Our Kolkata team quotes supply across India, including eastern India, with availability and freight confirmed for your order.